ba679, ba679s www.vishay.com vishay semiconductors rev. 1.8, 16-may-12 1 document number: 85529 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 rf pin diodes - single in minimelf sod-80 features ? wide frequency range 10 mhz to 1 ghz ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? current controlled hf resistance in adjustable attenuators mechanical data case: minimelf sod-80 weight: approx. 31 mg cathode band color: black packaging codes/options: gs18/10k per 13" reel (8 mm tape), 10k/box gs08/2.5k per 7" reel (8 mm tape), 12.5k/box parts table part type differentiation ordering code type marking internal construction remarks ba679 z r > 5 k ? BA679-GS18 or ba679-gs08 - single diode tape and reel ba679s z r > 9 k ? ba679s-gs18 or ba679s-gs08 - single diode tape and reel absolute maximum ratings (t amb = 25 c, unless otherwise specified) part test condition symbol value unit reverse voltage v r 30 v forward continuous current i f 50 ma thermal characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit thermal resistance junction to ambient air on pc board 50 mm x 50 mm x 1.6 mm r thja 500 k/w junction temperature t j 125 c storage temperature range t stg - 55 to + 150 c electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition p art symbol min. typ. max. unit forward voltage i f = 20 ma v f 1v reverse current v r = 30 v i r 0.05 a diode capacitance f = 100 mhz, v r = 0 v c d 0.5 pf differential forward resistance f = 100 mhz, i f = 1.5 ma r f 50 ? reverse impedance f = 100 mhz, v r = 0 v ba679 z r 5k ? ba679s z r 9k ? minority carrier lifetime i f = 10 ma, i r = 10 ma ? 4s
ba679, ba679s www.vishay.com vishay semiconductors rev. 1.8, 16-may-12 2 document number: 85529 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. forward voltage fig. 2 - differential forward resistance vs. forward current fig. 3 - typ. cross modulation distortion vs. frequency f 2 0 0.4 0. 8 1.2 1.6 0.01 0.1 1 10 100 2.0 95 9735 i- for w ard c u rrent (ma) f v f - for w ard v oltage ( v ) t am b = 25 c scattering limit 0.001 0.01 0.1 1 1 10 100 1000 10 000 10 95 9734 i f - for w ard c u rrent (ma) f > 20 mhz t j = 25 c r f - differential for w ard resistance ( ) - 8 0 - 60 - 40 - 20 0 20 a - typical cross mod u lation distortion (db) f 2 , mod u lated w ith 200 khz, m = 100 % (mhz) 8 0 60 40 20 0 95 9733 - circ u it w ith 10 db atten u ation v 0 =40dbm v f 1 = 100 mhz u nmod u lated
ba679, ba679s www.vishay.com vishay semiconductors rev. 1.8, 16-may-12 3 document number: 85529 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): minimelf sod-80 cathode indentification 0.47 (0.019) max. 2.5 (0.09 8 ) max. 1.25 (0.49) min. 3.7 (0.146) 3.3 (0.130) 5 (0.197) ref. 2 (0.079) min. 1.6 (0.063) 1.4 (0.055) foot print re commendation: * * the gap b et w een pl u g and glass can b e either on cathode or anode side doc u ment no.:6.560-5005.01-4 re v . 8 - date: 07.j u ne.2006 96 12070
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: vishay: ? ba679s-gs08? ba679-gs08? BA679-GS18? ba679s-gs18
|
